1. Preparation
1.1 Cleaning and inspection: First, the Crawler Type Mobile Stacker Reclaimer needs to be thoroughly cleaned and inspected to ensure that each component is free of foreign matter and damage.
1.2 Refueling: Fill the hydraulic oil to the standard level to ensure normal lubrication.
1.3 Power on: Connect the main power supply of the stacker and turn on all electrical equipment.
2. Operation steps
2.1 Before starting operation, place the stacker in a stable position to avoid tipping and sliding during movement.
2.2 Open the hopper, raise it to the highest point, and install a flat shovel at the bottom of the hopper. Before lifting, the shovel needs to be positioned to find the appropriate angle.
2.3 Start receiving materials. After positioning the hopper and the shovel angle, start lowering the hopper and receiving materials.
2.4 After loading is completed, raise the hopper to the top and place the shovel in a suitable position and hold it there for a few seconds to allow the material in the shovel to fall.
2.5 Raise the hopper to the highest point, close the hopper, and the stacker will stop working.
3. Safety precautions
3.1 The operator must be familiar with the operating procedures of the stacker and must perform inspection and maintenance before use.
3.2 During operation, you should pay attention to the surrounding safety conditions and maintain a safe distance.
3.3 When performing lifting operations, do not be too hasty and proceed slowly to prevent materials from falling or damaging the equipment.
3.4 After each use, the stacker should be thoroughly cleaned and maintained to ensure the long-term use of the stacker.
In short, as an important construction machinery, the stacker needs to be fully prepared before operation, and then operated after it is in place. At the same time, safety precautions must be strictly followed to ensure safety during operation and eliminate accidents.